Brother International Innov-is 4500D Operation Manual - Page 96
Be sure to securely tighten the screws with the, included screwdriver. Otherwise, the needle, may
View all Brother International Innov-is 4500D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
SEWING THE STITCHES b Press to set the machine to free- motion sewing mode. d Remove 38). the presser foot holder (see page e Attach free-motion quilting foot "C" at the front with the presser foot holder screw aligned with the notch in the quilting foot. a b → The key appears as , and the quilting foot is raised to the necessary height for free-motion sewing. a Presser foot holder screw b Notch Note Make sure that the quilting foot is attached properly and not slanted. f Hold the quilting foot in place with your right hand, and tighten the presser foot holder screw using the screwdriver with your left hand. a a Presser foot holder screw CAUTION • Be sure to securely tighten the screws with the included screwdriver. Otherwise, the needle may touch the quilting foot, causing it to bend or break. c Select any of the following stitches. → Free-motion quilting foot "C" is indicated in the upper-left corner of the screen. 84