Brother International Innov-is 4500D Operation Manual - Page 44
guide plate.
View all Brother International Innov-is 4500D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
UPPER THREADING d Raise the presser foot lever. g Holding the thread the thread into the with both hands, slide grooves on the thread guide plate. CAUTION • If the presser foot is not raised, the sewing machine cannot be threaded correctly. e Pivot the spool pin so that it angles upward. Set the thread spool on the spool pin so that the thread unwinds from the front of the spool. a a Thread guide plate h While holding the thread in your right hand, use your left hand to pull the thread toward the threading path cover, then pass it along the thread path as shown in the illustration. Be sure to pass the thread along the right side of the thread path guide. 1a a b c b a Spool pin b Spool cap c Thread spool f Push the spool cap onto the spool pin as far as possible, then return the spool pin to its original position. a Threading path cover b Thread path guide i Pull the thread under the thread path guide. CAUTION a • If the thread spool and/or spool cap are set incorrectly, the thread may tangle on the spool pin and cause the needle to break. • Use the spool cap (large, medium, or small) that is closest in size to the thread spool. If a spool cap smaller than the thread spool is used, the thread may become caught in the slit on the end of the spool and cause the needle to break. (aA) a Thread path guide 32