Brother International Innov-is 4500D Operation Manual - Page 94

SEWING THE STITCHES I Quilting with Satin Stitches Use the foot controller to sew with satin stitches. If you set the speed control slide to control the stitch width, you can make subtle changes in the stitch width during sewing. a Attach the foot controller (see page 45). b Select and attach presser foot "J". c Press in the length display to shorten the stitch length. e Set the width control to "ON". Memo You can use the speed control slide to adjust the stitch width. Use the foot controller to adjust the sewing speed. Memo The setting will vary according to the kind of fabric and the thickness of the thread, but a length of 0.3 to 0.5 mm (approx. 1/64 to 1/32 inch) is best for satin stitches. d Press to use the speed control slide to control the stitch width. f Press . → The display will return to the original screen. g Start sewing. * You can adjust the stitch width during sewing by moving the sewing speed controller. Slide the lever to the left, and the stitch width becomes narrower. Slide it to the right, the stitch width becomes wider. The size of the width changes equally on both sides of the middle needle position. a b a narrower b wider J Rough sketch (line) h When you are finished sewing, width control back to "OFF". set the 82