Brother International Innov-is 4500D Operation Manual - Page 47

UPPER THREADING e Place the additional spool of thread on the supplemental spool pin, so that the thread g Pass the thread through the thread guide plate, following the sequence as described unwinds from the front. Then push the below (or refer to "Threading Manually" on spool cap onto the spool pin as far as page 31). possible to secure the thread spool. 1 Getting Ready a b c a Spool pin b Spool cap c Thread spool f Hold the thread from the spool with both hands, and place the thread in the thread guide. * Do not place the thread in the bobbin winding thread guide. a h Do not pass the thread in the needle bar thread guides on the needle bar. Thread the needle on the right side. a Thread guide i Press . 35