Brother International Innov-is 4750D Operation Manual - Page 138
Changing Thread Density, for Satin Stitch Patterns Only, Returning to the Beginning of the, Pattern
View all Brother International Innov-is 4750D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 138 highlights
EDITING STITCH PATTERNS Changing Thread Density (for Satin Stitch Patterns Only) After selecting the pattern, press your preferred thread density. to select Returning to the Beginning of the Pattern When sewing character/decorative stitches, you can return to the beginning of the pattern after trial sewing or when the stitching is sewn incorrectly. a Press the "Start/Stop" button to stop the machine, and then press . CAUTION If the stitches bunch when thread density is changed to , return the thread density to . If you continue sewing when the stitches are bunched, the needle may bend or break. Memo • Even if you select a new pattern after chang- ing the thread density, the thread density remains the same until you change it. • You cannot change thread density for a combined pattern after the combination is finished. → Sewing returns to the beginning of the selected pattern ("W") from the point where sewing was stopped. Memo If this key is pressed when sewing is stopped, patterns can be added at the end of a combined stitch pattern. (In this example, "!" is added.) 126