Brother International Innov-is 4750D Operation Manual - Page 66

USEFUL FUNCTIONS Note • The "NEEDLE POSITION" (P. 2 of the set- tings screen) must be set in the down position for the pivot function to be used. When "NEEDLE POSITION" is set in the raised position, appears as light gray and cannot be used. • When the setting is selected, the pivot function can only be used with stitches where presser foot J or N is indicated in the upperleft corner of the screen. If any other stitch is selected, appears as light gray and is not available. • Since the presser foot is fully raised when the automatic thread cutting key is pressed, press the "Presser Foot Lifter" button to lower the presser foot, and then press the "Start/Stop" button to continue sewing. • If the pivot setting is selected, and beside "PRESSER FOOT HEIGHT" in the settings screen are not available and the setting cannot be changed. a Select a stitch. b Press to select the pivot setting. c Place the fabric under the presser foot the needle at the starting point of the with stitching, and then press the "Start/Stop" button. The machine will begin sewing. Memo If you press the "Start/Stop" button to pause sewing, then press it again to continue, reverse stitches (or reinforcement stitches) will not be sewn. d Press the "Start/Stop" button to stop the machine at the point where the sewing direction changes. → The machine stops with the needle in the fabric, and the presser foot is raised. e Rotate the fabric, Stop" button. and then press the "Start/ → The key appears as . → The presser foot is automatically lowered, and sewing continues. 54