Brother International Innov-is 4750D Operation Manual - Page 179

f Repeat the same steps remaining colors. for embroidering the SEWING AN EMBROIDERY PATTERN ■ When Threading Manually a Thread the machine manually with the first color (see "Threading Manually" on page 31). b Lower the presser foot, then press the "Start/Stop" button to start embroidering. After 5-6 stitches, press the "Start/Stop" button again to stop the machine. → When the last color is sewn, "Finish sewing" will appear on the display. Press , and the c Trim the excess thread at the end of the seam. If the end of the seam is under the display will return to the original screen. presser foot, raise the presser foot, then Memo trim the excess thread. The Thread Trimming Function is originally set to trim excess thread jumps (threads linking 5 parts of the pattern, etc.). When an end of upper thread may remain on the surface of the Embroidery fabric at the beginning of the stitching, depending on the type of thread and fabric that are used. After embroidering is finished, cut off this excess thread. *If the setting has been turned off, trim the excess thread jumps using scissors after the pattern is finished. See page 175 for information on the thread trimming function. Memo If there is thread left over from the beginning of sewing, it may be sewn over as you con- tinue embroidering the pattern, making it very difficult to deal with the thread after the pattern is finished. Trim the threads at the beginning. d Press the "Start/Stop" restart the machine. button again to e Repeat steps section. d and e from the previous 167