Brother International Innov-is 4750D Operation Manual - Page 14
Needle and Presser Foot
View all Brother International Innov-is 4750D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
NAMES OF MACHINE PARTS AND THEIR FUNCTIONS Needle and Presser Foot Section f i a b j e g h d Measurements on the needle plate, bobbin cover and needle plate cover The measurements on the bobbin cover are references for patterns with a middle (center) needle position. The measurements on the needle plate and the needle plate cover are references for stitches with a left needle position. b c d e c f a Presser foot holder The presser foot is attached onto the presser foot holder. b Presser foot The presser foot applies pressure consistently on the fabric as sewing takes place. Attach the appropriate presser foot for the selected stitch. c Feed dogs The feed dogs feed the fabric in the sewing direction. d Bobbin cover Open the bobbin cover to set the bobbin. e Needle clamp screw Use the needle clamp screw to hold the needle in place. f Buttonhole lever The buttonhole lever is used with the one-step buttonhole foot to create buttonholes. g Needle bar thread guides Pass the upper thread through the two needle bar thread guides. h Needle plate The needle plate is marked with guides to help sew straight seams. i Presser foot holder screw Use the presser foot holder screw to hold the presser foot in place. j Needle plate cover Remove the needle plate cover to clean the race. ba a For stitches with a middle (center) needle position b For stitches with a left needle position c Left needle position on the needle plate d Left needle position on the needle plate e Middle (center) needle position on the bobbin cover f Left needle position on the needle plate cover 2