Brother International Innov-is 4750D Operation Manual - Page 28
Using the Machine Setting Mode Key
View all Brother International Innov-is 4750D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
LCD SCREEN Using the Machine Setting Mode Key Press to change the default machine settings (needle stop position, embroidery speed, opening display, etc.) Press , or to display the different settings screens. Memo • This function will be available in future technology upgrades. • Press or to display a different settings screen. Sewing settings a b c d e f g h i a Select whether to use the sewing speed controller to determine the zigzag width (see page 82). b Make adjustments to character or decorative stitch patterns (see page 121). c Adjust the presser foot height. (Select the height of the presser foot when the presser foot is raised.) d Adjust the presser foot pressure. (The higher the number, the higher the pressure will be. Set the pressure at 3 for normal sewing.) e Select whether "1-01 Straight stitch (Left)" or "1-03 Straight stitch (Middle)" is the utility stitch that is automatically selected when the machine is turned on. f Change the height of the presser foot when sewing is stopped when the pivot setting is selected (see page 53). Adjust the presser foot to one of the three heights (3.2 mm, 5.0 mm and 7.5 mm). g Change the height of the presser foot when the machine is set to free-motion sewing mode (see page 83). h When set to "ON", the thickness of the fabric is automatically detected by an internal sensor while sewing, so the fabric can be fed smoothly (see pages 47 and 55). i Adjust the character spacing on Character/Decorative stitch (see page 119). 16