Brother International Innov-is 4750D Operation Manual - Page 181

f Apply a thin layer of adhesive to the back adhesive or spray of the appliqué piece and attach it to the appliqué position so that it follows the seam of the outline. SEWING AN EMBROIDERY PATTERN Memo If the appliqué material is a lightweight fabric, you may want to use a fusible web on the back to stabilize the fabric and for appliqué placement. Fuse appliqué in place with an iron. Do not remove fabric from the frame to iron the appliqué material. g Press the "Start/Stop" button. 5 Embroidery Memo Some patterns may not show all three appliqué steps. Sometimes the "Appliqué" step will be shown as a color. → The appliqué will then be completed. h Change the rest the upper thread and of the embroidering. then carry out Memo • Some glue may get onto the presser foot, needle, and needle plate at this time. Finish embroidering the appliqué pattern and then clean away the glue. • For best sewing results clip all threads between color steps. 169