Brother International Innov-is 4750D Operation Manual - Page 88

SEWING THE STITCHES ■ Overcasting Using the Side Cutter By using the side cutter, you can do overcasting while cutting the fabric. CAUTION • Make sure to only select one of the stitches listed below. Using another stitch may cause the needle to hit the presser foot and break, possibly causing injury. Memo Thread the needle manually when using the side cutter, or only attach the side cutter after threading the needle using the "Automatic Threading" button. Stitch Stitch name With side cutter With side cutter With side cutter With side cutter With side cutter a Select a stitch. Presser foot Applications Straight stitch while cutting fabrics Stitch width [mm (inch.)] Auto. Manual 0.0 0.0 - 2.5 (0) (0 - 3/32) Stitch length [mm (inch.)] Auto. Manual 2.5 0.2 - 5.0 (3/32) (1/64 - 3/16) Zigzag stitch while cutting fabrics 3.5 (1/8) 3.5 - 5.0 1.4 (1/8 - 3/16) (1/16) 0.0 - 4.0 (0 - 3/16) Overcasting stitch while cutting fabrics 3.5 (1/8) 3.5 - 5.0 2.0 1.0 - 4.0 (1/8 - 3/16) (1/16) (1/16 - 3/16) Overcasting stitch while cutting fabrics 5.0 (3/16) 3.5 - 5.0 (1/8 - 3/16) 2.5 1.0 - 4.0 (3/32) (1/16 - 3/16) Overcasting stitch while cutting fabrics 5.0 (3/16) 3.5 - 5.0 (1/8 - 3/16) 2.5 1.0 - 4.0 (3/32) (1/16 - 3/16) Twin needle NO NO NO NO NO c Position the fork on the side cutter's operating lever onto the needle clamp screw. b a b Follow the steps presser foot. on page 37 to remove the a Needle clamp screw b Operating lever Memo Make sure that the fork of the operating lever is set onto the needle screw firmly. 76