Brother International Innov-is 4750D Operation Manual - Page 79
Dart Seam
View all Brother International Innov-is 4750D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
■ Basting a Select and attach presser foot "J". b Press the "Reverse/Reinforcement Stitch" button to sew reinforcement stitches, then continue sewing. Dart Seam SEWING THE STITCHES a Select and attach presser foot "J". b Sew dart a reverse stitch at the beginning of and then sew from the wide end to the the other end without stretching the fabric. * If automatic reinforcement stitching is preset, a reinforcement stitch will automatically be sewn at the beginning of sewing. a 3 Utility Stitches Memo If you do not want to use a reinforcement stitch at the beginning; you should lift the presser foot, rotate the handwheel, pull up the bobbin thread and pull a length of top and bobbin thread out from the rear of the machine. You can set the stitch length between 5 mm (approx. 3/16 inch) and 30 mm (approx. 1-3/16 inches) a Basting c Cut the thread at (approx. 1-15/16 the end leaving 50 mm inches), and then tie both ends together. * Do not sew a reverse stitch at the end. a a Between 5 mm (approx. 3/16 inch) and 30 mm (approx. 1-3/16 inches) c Sew while keeping the fabric straight. d Insert the ends with a needle. of the thread into the dart d End the basting with reinforcement stitches. 67