Brother International Innov-is 4750D Operation Manual - Page 256
Reverse/Reinforcement Stitch
View all Brother International Innov-is 4750D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 256 highlights
ERROR MESSAGES This message is displayed when the patterns you are editing take up too much memory, or if you are editing too many patterns for the memory. This message is displayed when the "Start/Stop" button is pushed to sew Utility stitches or Character/Decorative stitches while the foot controller is connected. (This message does not appear when embroidering.) This message is displayed when the "Start/ Stop" button is pushed while the machine is in embroidery edit mode and a pattern is being edited. This message is displayed when a key on the LCD display is touched while the needle is in the down position. This message is displayed when the buttonhole lever is down, a stitch other than a buttonhole is selected, and the "Start/ Stop" button or the "Reverse/ Reinforcement Stitch" button is pushed. This message is displayed when the embroidery unit is attached and the power is turned on with the needle in the down position. This message is displayed when the buttonhole lever is up, a buttonhole stitch is selected, and the "Start/ Stop" button or "Reverse/Reinforcement Stitch" button is pushed. This message is displayed when there are too many characters and the curved character configuration is impossible. This message is displayed when the machine is in embroidery mode and the combined character pattern is too large for the embroidery frame. You can rotate the pattern 90 degrees and continue combining characters. This message is displayed when the machine is in embroidery mode, and the character pattern combination is too large to fit in the embroidery frame. 244