Brother International MFC 3420C Users Manual - English - Page 139
Cropping, Understanding the Error Messages, Menu/Set
UPC - 012502607144
View all Brother International MFC 3420C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 139 highlights
■ Sharpness This setting enhances the detail of an image. It is similar to adjusting the fine focus on a camera. If the image is not in true focus and you cannot see the fine details of the picture, then adjust the sharpness. ■ Color Density This setting adjusts the total amount of color in the image. You can increase or decrease the amount of color in an image to improve a washed out or weak picture. Cropping If your photo is too long or wide to fit the available space on your selected layout, part of the image will be automatically cropped. The default setting is On. If you want to print whole image, turn this setting to Off. 1 Press Menu/Set, 4, 6. 2 Press or to select Off (or On). Press Menu/Set. Understanding the Error Messages Once you are familiar with the types of errors that can occur while you're using the PhotoCapture Center™, you can easily identify and troubleshoot any difficulties. When an error message appears on the LCD, the MFC will beep to get your attention. Media Error-This message will appear if you insert a media card that is either bad or not formatted, or when there is a problem with the media drive. To clear this error, take out the media card. No File-This message will appear if you try to access the media card in the drive (slot) does not contain a .JPG file. Out Of Memory-This message will appear if you are working with images that are too large for the MFC's memory. Unsupported Card-This message will appear if you insert a media card that is not supported. 11 - 12 WALK-UP PHOTOCAPTURE CENTER™ (MFC-3820CN ONLY)