Brother International MFC 3420C Users Manual - English - Page 89
Dual Access (Not available for color faxes), Real Time Transmission, Menu/Set, Stop/Exit, Black Start
UPC - 012502607144
View all Brother International MFC 3420C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
Dual Access (Not available for color faxes) You can dial a number, and begin scanning the fax into memory- even when the MFC is sending from memory or receiving faxes. The LCD shows the new job number and available memory. Your MFC normally uses Dual Access. However, to send a color fax, the MFC will send the original in real time (even if Real Time TX is Off). The number of pages you can scan into the memory will vary depending on the data that is printed on them. If you get a Out of Memory message while scanning the first page of a fax, press Stop/Exit to cancel scanning. If you get a Out of Memory message while scanning a subsequent page, you can press Black Start to send the pages scanned so far, or press Stop/Exit to cancel the operation. Real Time Transmission When you are sending a fax, the MFC will scan the originals into the memory before sending. Then, as soon as the phone line is free, the MFC will start dialing and sending. If the memory becomes full, the MFC will send the original in real time (even if Real Time TX is set to Off). Sometimes, you may want to send an important original immediately, without waiting for memory transmission. You can set Real Time TX to On for all documents or for the next fax only. If you want to fax multiple pages, use Dual Access. (See Dual Access (Not available for color faxes) on page 6-9.) 1 If it is not illuminated in green, press (Fax). 2 Load your original. (See Load originals on page 2-1.) 3 Press Menu/Set, 2, 2, 5. 5.Real Time TX 6 - 9 SETUP SEND