Brother International MFC 495CW Quick Setup Guide - English - Page 26

For wired network interface users (Mac OS X 10.3.9 - 10.4.x - 10.5.x), 17 Before you install, 18 - mac driver

Get Brother International MFC 495CW - Color Inkjet - All-in-One PDF manuals and user guides
UPC - 012502623175
View all Brother International MFC 495CW manuals
Add to My Manuals
Save this manual to your list of manuals

Page 26 highlights

Wired Network Macintosh For wired network interface users (Mac OS X 10.3.9 - 10.4.x - 10.5.x) 17 Before you install a Make sure your machine is connected to the power and your Macintosh is ON. You must be logged on with Administrator rights. IMPORTANT • For the latest drivers and information on the Mac OS X you are using, visit http://solutions.brother.com/. • For Mac OS X 10.3.0 to 10.3.8 users, upgrade to Mac OS X 10.3.9 - 10.5.x. • Make sure there are no memory cards or a USB Flash memory drive inserted into the machine. • If you have previously set up your machine for a wireless network and then want to set it up on a wired network, you should check that the machine's Network I/F is set to Wired LAN. The wireless network interface will become inactive with this setting. On your machine, press Menu. Press a or b to choose Network and press OK. Press a or b to choose Network I/F and press OK. Press a or b to choose Wired LAN and press OK. Press Stop/Exit. 18 Connect the network cable a Using both hands, use the plastic tabs on both sides of the machine to lift the scanner cover until it locks securely into the open position. b Connect the network cable to the LAN socket marked with a symbol. You will find the LAN socket inside the machine on the left as shown below. LAN USB 26

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
26
Macintosh
Wired Network
For wired network interface users (Mac OS X 10.3.9 - 10.4.x - 10.5.x)
17
Before you install
a
Make sure your machine is connected to the
power and your Macintosh is ON. You must be
logged on with Administrator rights.
18
Connect the network
cable
a
Using both hands, use the plastic tabs on both
sides of the machine to lift the scanner cover
until it locks securely into the open position.
b
Connect the network cable to the LAN socket
marked with a
symbol. You will find the
LAN socket inside the machine on the left as
shown below.
IMPORTANT
•
For the latest drivers and information on the
Mac OS X you are using, visit
.
•
For Mac OS X 10.3.0 to 10.3.8 users, upgrade
to Mac OS X 10.3.9 - 10.5.x.
•
Make sure there are no memory cards or a
USB Flash memory drive inserted into the
machine.
•
If you have previously set up your machine
for a wireless network and then want to set
it up on a wired network, you should check
that the machine’s
Network I/F
is set to
Wired LAN
. The wireless network interface
will become inactive with this setting.
On your machine, press Menu.
Press
a
or
b
to choose
Network
and press
OK.
Press
a
or
b
to choose
Network I/F
and
press OK.
Press
a
or
b
to choose
Wired LAN
and press
OK.
Press Stop/Exit.
LAN
USB