Canon MF7280 imageCLASS MF7280 Facsimile Guide - Page 101

5 Press (Start). If the original is placed on the platen glass, follow the instructions that appear on the touch panel display ➞ press (Start) once for each original. When scanning is complete, press [Done]. The document is stored in memory, and then sent to the specified destination at the specified time. NOTE • To cancel a delayed send job, press [Send Settings] ➞ [Delayed Send] ➞ [Cancel]. 2 • To cancel all settings and return the machine to the Standard mode, press (Reset). • You can also cancel a delayed send job from the System Monitor screen. (See "Using the System Monitor Screen," on p. 1-45.) Stamping Originals The machine can print a stamp (approximately 1/8" (3 mm) in diameter) on the front side of scanned originals. Send and Receive Methods ABC Position at which stamp is applied. ABC Position at which stamp is applied. Vertical placement Horizontal placement IMPORTANT The Stamp mode cannot be used with the Document Size or Different Size Originals mode. 1 Press (SEND) ➞ place your originals into the feeder ➞ specify the destination ➞ specify the desired send options ➞ press [Send Settings]. If necessary, see the screen shot in step 1 of "Delaying a Send Job," on p. 2-31. Sending Methods 2-33