Canon MF7280 imageCLASS MF7280 Facsimile Guide - Page 56
Platen Glass, Lift the feeder.
UPC - 013803056129
View all Canon MF7280 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
NOTE • If the top edge of the original is not aligned with the back edge of the platen glass (by the arrow in the top left corner), your original may not be scanned correctly, depending on the scan and send modes that you have set. • Originals of the following sizes can be placed either vertically or horizontally. However, the scanning speed for horizontally placed originals is somewhat slower than vertically 1 placed originals. - Platen glass: LTR, STMT - Feeder: LTR • Horizontally placed LTR and STMT originals are referred to as LTRR and STMTR. • 11" x 17" and LGL originals must be placed horizontally. Introduction to Fax Functions Platen Glass You should use the platen glass when scanning bound originals (such as books and magazines), heavy or lightweight originals, and transparencies. (See "Document Size," on p. 2-5.) NOTE The machine automatically detects the size of the following originals: 11" x 17", LGL, LTR, and LTRR. 1 Lift the feeder. Sensor IMPORTANT The machine is equipped with an open/close sensor on the feeder (see circled area in the above illustration). When placing originals on the platen glass, lift the feeder high enough so that the sensor does not touch the feeder. If the sensor continues to touch the feeder, the size of the original may not be detected correctly. 1-36 Placing Originals