Canon MF7280 imageCLASS MF7280 Facsimile Guide - Page 30

• Date and Time - The date and time of the transmission are recorded. • I-Fax Address or Fax Number - Your machine's I-fax address or fax number is recorded. • Sender's Name (TTI (Transmit Terminal Identification)) - The name registered as the unit name is recorded. 1 • Page Number - The current page number out of the total number of pages of the original is recorded. NOTE If the machine is set so that the sending record is printed at the top of the recording paper, and not all of the items are registered, only the required registered items and the total number of original pages are printed. Introduction to Fax Functions Setting the Display Language If you decide to switch the display language, set Language Switch in Common Settings (from the Additional Functions screen) to 'On' before entering characters. If Language Switch is set to 'Off', and then you set it to 'On' after entering characters, the characters may not be displayed correctly. In this case, re-enter the characters after setting Language Switch to 'On', or enter characters with Language Switch set to 'Off'. Selecting the Type of Telephone Line Set the type of telephone line that is connected to the machine. If you are not sure what type of telephone line you have, check with your local telephone company. To operate the Fax function, you must know whether the machine is connected to a touch-tone or rotary pulse telephone line. The machine can be set to operate with either type of telephone line. Be sure to check the type of telephone line you are using, and make the correct setting. If this setting is incorrect, you will not be able to communicate with other machines. Follow the procedure below to switch the fax setup between tone and pulse dialing. NOTE The default setting is 'Tone'. 1-10 Things You Must Do Before Using This Machine