Canon MF7280 imageCLASS MF7280 Facsimile Guide - Page 70
Selecting a Scan Mode
UPC - 013803056129
View all Canon MF7280 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
Selecting a Scan Mode You can set the scan mode in which a document is scanned. The machine has three preset scan modes: B&W 200x200dpi, B&W 300x300dpi, and Color 2 300x300dpi. Select the desired mode from the preset scan modes according to the type of original you are sending. Send and Receive Methods IMPORTANT If the destination is a fax number, the original is always scanned and sent in B&W mode. NOTE • If you want to use less memory and make the sending time shorter, use a lower resolution mode. • The default setting is 'B&W 200x200dpi'. You can change this setting in Edit Standard Send Settings in TX Settings under in Communications Settings (from the Additional Functions screen). (See Chapter 7, "Customizing Communications Settings," in the Sending Guide.) • Color mode setting is not available for the fax function. You can select only the B&W mode when sending faxes. • In addition to the scan mode, you can store addresses and other send settings in the favorites buttons. (See Chapter 7, "Customizing Communications Settings," in the Sending Guide.) 1 Place your originals ➞ specify the destination. 2-2 Selecting a Scan Mode