Canon iP100 Quick Start Guide - Page 35
Print Head Deep Cleaning, Maintenance, Deep Cleaning, Execute, Power
UPC - 013803067316
View all Canon iP100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Print Head Deep Cleaning If print quality does not improve by standard Print Head Cleaning, try Print Head Deep Cleaning, which is a more powerful process. Note that cleaning the Print Head causes used ink to be absorbed in the ink absorber. Print Head Deep Cleaning consumes more ink than standard Print Head Cleaning, so perform this procedure only when necessary. 1 Make sure that the printer is on. 2 Open the printer properties dialog box. 3 Start Print Head Deep Cleaning. (1) Click the Maintenance tab. (2) Click Deep Cleaning. (3) Select the ink group to be deeply cleaned. Note Clicking Initial Check Items displays the items to be checked before deep cleaning. (3) (4) Click Execute. (4) (5) Confirm the displayed message and click OK. Print Head Deep Cleaning starts when the Power lamp starts flashing green. Do not perform any other operations until Print Head Deep Cleaning finishes. This takes about 2 minutes. 4 Check the condition of the Print Head. (1) Load a sheet of A4 or Letter-sized plain paper in the Rear Tray and set the Paper Thickness Lever to the right. For details on the Paper Thickness Lever, refer to "Front View" in "Main Components" of the User's Guide on-screen manual. (2) Print the nozzle check pattern to check the print head condition. See "Printing the Nozzle Check Pattern" on page 25. (3) If the print head nozzles are still not clean, turn off the printer and perform another Print Head Deep Cleaning after 24 hours. (4) If this does not solve the problem, the Print Head may be damaged. Contact your Canon Service representative. Routine Maintenance 31