Canon imagePROGRAF W6400 PPlugIn-E.pdf - Page 20

Print Plug-In for Photoshop Chapter 2 Functions of Print Plug-In 7 Media Source You can select the media source. The following settings are available for media source. For W8400PG and W6400PG Setting Roll Paper Cut Sheet Details Roll paper is output. Cut paper is output. For W2200S Setting Auto Cassette 1, Cassette 2 Manual Details Media is output by the method set to the printer. Media is output from the selected cassette. Media is output from the manual feed media slot. Note The details of Media Source you have set is saved even when you close Print Plug-In. 8 Roll Paper Options Button (displayed only with W8400PG and W6400PG) Click this button to open the Roll Paper Options dialog box, where you can set roll paper width and perform auto cut settings. Note You cannot select this if Cut Sheet is selected in Media Source. Roll Paper Options Dialog Box Setting Roll Paper Width Automatic Cutting Available None Print Cut Guideline No Spaces at Top or Bottom (Conserve Paper) Details This selects the width of the roll media set to the printer. • The selectable roll paper widths differ by printer. When printing is complete, the roll media is automatically cut. When printing is complete, the roll media is not automatically cut and should be cut by hand. When printing is complete, the roll media is not automatically cut. Print cut line is printed for cutting by manual. When you place a checkmark here, the print data is printed without margins. 9 Defaults Button Click this button to return all of the settings on the Page Setup sheet to their defaults. 2-10