Canon imagePROGRAF iPF6300S iPF6300S User Manual ver.1.00 - Page 1044
Problems with the printing quality, Printing is faint
View all Canon imagePROGRAF iPF6300S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1044 highlights
Troubleshooting > Problems with the printing quality > Problems with the printing quality Printing is faint ...1026 Paper rubs against the printhead ...1027 The edges of the paper are dirty ...1028 The surface of the paper is dirty ...1029 The back side of the paper is dirty ...1029 Roller marks are left across the trailing edge of paper 1029 Immediately after borderless printing, the trailing edge margin is soiled during regular printing 1029 Printed colors are inaccurate ...1030 Banding in different colors occurs ...1030 Colors in printed images are uneven ...1031 Image edges are blurred or white banding occurs 1032 Setting the Blue Switch on the Platen ...1033 The contrast becomes uneven during printing 1036 The length of printed images is inaccurate in the feeding direction 1036 Images are printed crooked ...1036 Documents are printed in monochrome ...1036 Line thickness is not uniform ...1037 Lines or colors are misaligned ...1037 Borderless printing is not possible ...1038 Problems with the printing quality caused by the type of paper 1038 12 1026 Printing is faint Cause You may be printing on the wrong side of the paper. The Printhead nozzles are clogged. Because the printer was left without ink tanks installed for some time, ink has become clogged in the ink supply system. Paper is jammed inside the Top Cover. The ink was not dry when paper was cut. Corrective Action Print on the printing surface. Print a test pattern to check the nozzles and see if they are clogged. (See "Checking for Nozzle Clogging.") →P.980 After the ink tanks have been installed for 24 hours, run Head Cleaning B from the Control Panel. (See "Cleaning the Printhead.") →P.981 Follow the steps below to remove the jammed piece of paper inside the Top Cover. 1. Open the Top Cover and make sure the Carriage is not over the Platen. 2. Remove any scraps of paper inside the Top Cover. (See "Clearing Jammed Roll Paper.") →P.1014 (See "Clearing a Jammed Sheet, Fed Manually.") →P.1018 3. Close the Top Cover. Specify a longer drying period in the Control Panel menu, in Paper Details > Roll DryingTime. (See "Menu Settings.") →P.914 Printing is faint iPF6300S