Canon imagePROGRAF iPF6300S iPF6300S User Manual ver.1.00 - Page 1076

Error Message > Messages regarding paper > Paper loaded askew. Cause Paper loaded crooked was detected when the paper was advanced. Corrective Action Follow these steps to reload the roll. 1. Press the OK button. 2. Adjust the right edge of the roll to make it par- allel to the orange Paper Alignment Line. (See "Loading Rolls in the Printer.") →P.784 If this error recurs after you reload the roll, remove the Roll Holder from the printer, push the roll firmly in until it touches the Roll Holder flange, and reload the Roll Holder in the printer. (See "Loading Rolls on the Roll Holder.") →P.781 Follow these steps to reload a sheet. 1. Press the OK button. 2. Pull out the sheet. 3. Load the sheet. see "Loading Sheets in the Feed Slot." →P.809 Important • To disable this message (if it is displayed repeatedly despite reloading paper, for example), choose Off or Loose in the Skew Check Lv. setting of the printer menu. However, this may cause jams and printing problems because paper may be askew when printed. Also, the Platen may become soiled, which may soil the back of the next document when it is printed. Paper not aligned with right guide. Cause Corrective Action 13 When paper was loaded, it was not aligned with the guide on the right side. Follow these steps to reload the sheet. 1. Press the OK button to clear the error. 2. Reload the paper. (See "Loading Sheets in the Feed Slot.") →P.809 1058 Cannot detect papr Cause The printer could not detect the paper. Corrective Action Reload the paper as follows. 1. Remove the paper and press the OK button. 2. Reload the paper. (See "Loading Sheets in the Feed Slot.") →P.809 (See "Loading Rolls in the Printer.") →P.784 Paper loaded askew. iPF6300S