Canon imagePROGRAF iPF6300S iPF6300S User Manual ver.1.00 - Page 1085

Error Message > Messages regarding printing or adjustment > Before borderless printing, move the blue platen switch. Cause The blue Switch on the platen was set to the side opposite ● when a borderless print job was received. Corrective Action Before borderless printing, set the blue Switch on the platen to the ● side. (See "Setting the Blue Switch on the Platen.") →P.1033 Blue platen switch is dirty. Cause The blue Switch on the platen is dirty. Corrective Action Open the Top Cover and clean the blue Switch on the platen. (See "Cleaning Inside the Top Cover.") →P.998 Move the blue platen switch No.xx to the right. (xx represents a number) Cause The printer has detected that the blue Switch on the platen needed in maintenance during printing is set away from the ● mark. Corrective Action Set blue platen Switch of the indicated number toward the ● side. (See "Setting the Blue Switch on the Platen.") →P.1033 Cannot adjust paper feed. Cause The Printhead nozzles are clogged. Highly transparent film is loaded that cannot be used for automatic feed amount adjustment. Corrective Action Execute Adj. Quality again, as follows. 1. Press the OK button to clear the error. 2. Print a test pattern to check the nozzles. (See "Checking for Nozzle Clogging.") →P.980 3. Clean the Printhead if the nozzles are clogged. (See "Cleaning the Printhead.") →P.981 4. Execute Adj. Quality again. (See "Automatic Banding Adjustment (Adj. Quality).") →P.834 Press the OK button to clear the error, and then adjust the feed amount manually. (See "Manual Banding Adjustment (Adj. Quality).") →P.836 Check printed document. Cause The Printhead nozzles are becoming clogged. Corrective Action If printing is faint, clean the Printhead. (See "Cleaning the Printhead.") →P.981 13 1067 iPF6300S Before borderless printing, move the blue platen switch.