Canon imagePROGRAF iPF6300S iPF6300S User Manual ver.1.00 - Page 936

Control Panel > Printer Menu > Adjust Printer Head Posi. Adj. Setting Item Auto(Expansion) Description, Instructions The printer prints and reads a test pattern for automatic adjustment of Printhead alignment relative to the printing direction and spacing between nozzles and colors. Adjustment is performed at a higher level of precision than Auto(Advanced). (See "Automatic Adjustment to Straighten Lines and Colors (Head Posi. Adj.).") →P.827 Manual Print a test pattern for adjustment of Printhead alignment relative to the printing direction. Enter the adjustment value manually based on the resulting pattern. (See "Manual Adjustment to Straighten Lines and Colors (Head Posi. Adj.).") →P.829 Feed Priority Adj. Priority Automatic Print Quality Print Length Specify exact paper feeding, if desired. Normally, select Automatic. Choose Print Quality for attractive printing. Choosing Print Quality also makes banding less noticeable. Choose Print Length if you prefer to feed the paper an exact amount. However, note that slight banding may occur in the direction of carriage scanning when Print Length is selected. Adj. Quality Auto(GenuinePpr) Specify this mode with paper identified in the Paper Reference Guide.(See Paper Reference Guide .) The printer prints and reads a test pattern for automatic adjustment of the feed amount. (See "Automatic Banding Adjustment (Adj. Quality).") →P.834 Auto(OtherPaper) Specify this mode with paper not in the Paper Refer- ence Guide.(See Paper Reference Guide .) 9 The printer prints and reads a test pattern for automatic adjustment of the feed amount. Note that this func- tion takes more time and consumes more ink than Au- to(GenuinePpr). (See "Automatic Banding Adjust- ment (Adj. Quality).") →P.834 Manual Use this mode with highly transparent media or other paper for which Auto(GenuinePpr) or Auto(OtherPaper) cannot be used. Print a test pattern for adjustment of the feed amount based on the type of paper. (See "Manual Banding Adjustment (Adj. Quality).") →P.836 Adjust Length AdjustmentPrint A:High B:Standard/Draft Print a test pattern for particular types of paper to compensate for paper stretching or shrinkage, after which you enter the amount of adjustment. (See "Adjusting Line Length (Adjust Length).") →P.838 Chang A:High Displayed when you have selected Feed Priority > 918 e Settings B:Standard/Draft Adj. Priority > Print Length. Adjustment relative to the amount of stretching or shrinkage of the current paper. Enter either the adjustment results from Adjustment- Print or the discrepancy that you measured (as a per- centage). For paper that tends to stretch, increase the feed amount by choosing a higher adjustment value. For paper that tends to shrink, decrease the feed amount by choosing a lower adjustment value. Menu Settings iPF6300S