Canon imagePROGRAF iPF6300S iPF6300S User Manual ver.1.00 - Page 253

Windows Software > Printer Driver > • F Scaling Resizes the document image based on a specified scaling value. Enter a value in a range of 5-600. • G Paper Size Choose the size of the paper you will print on. For details on available paper sizes, see "Paper Sizes →P.774 " • H Orientation Choose the printing orientation. • Making the Original Orientation Match the Paper Orientation →P.190 • K Rotate Page 90 degrees (Conserve Paper) Activate this setting to rotate the document image by 90 degrees before printing. • Conserving Roll Paper by Rotating Originals 90 Degrees →P.172 • L Paper Source Choose the feed source, as desired. 3 Options displayed in the list vary depending on the selection in Media Type on the Main sheet. • M Roll Paper Width Choose the roll width. For details on available roll widths, see "Paper Sizes →P.774 " • N Roll Paper Options Complete optional roll paper settings. Click to display the Roll Paper Options dialog box. Under A Automatic Cutting, you can specify Yes or No and Print Cut Guideline. • Cutting Roll Paper After Printing →P.196 Select B Banner Printing when printing multiple pages continuously. • Printing Multiple Pages Continuously →P.144 • O Size Options Click to display the Paper Size Options dialog box, which enables you to register additional paper sizes or select the size system for use. 235 • Paper Size Options Dialog Box →P.237 • S Defaults Restores all settings on the sheet to the default values. iPF6300S Page Setup Sheet