Canon imagePROGRAF iPF6300S iPF6300S User Manual ver.1.00 - Page 1074

Error Message > Messages regarding paper > Roll printing is selected, but manual paper is loaded. Cause A print job for rolls was received when a sheet is loaded. Corrective Action Follow these steps to load and print on a roll. 1. Press ▲ or ▼ to select Eject Paper, press the OK button, and remove the sheet. (See "Removing Sheets.") →P.817 2. Load a new roll. (See "Loading Rolls in the Printer.") →P.784 The printer now starts printing the print job. Press ▲ or ▼ to select Stop Printing, and then press the OK button. The roll is empty. Cause Corrective Action The roll is empty. Follow these steps to replace the used roll with a new roll of the same type and size. 1. Press the OK button and remove the roll. (See "Removing the Roll from the Printer.") →P.790 (See "Removing Rolls From the Roll Holder.") →P.792 2. Load the new roll. (See "Loading Rolls on the Roll Holder.") →P.781 (See "Loading Rolls in the Printer.") →P.784 3. If no barcode was printed on the roll, specify the type of paper. (See "Changing the Type of Paper.") →P.787 4. When you have selected ManageRemainRoll > On in the control panel menu and a barcode is not printed on the roll, also specify the paper length. (See "Specifying the Paper Length.") →P.789 5. If "Not finished printing. Finish printing remaining jobs?" is shown on the Display Screen, press the OK button. Printing will resume, starting from the page on which the error occurred. 13 There is remaining The unused portion of the roll is heavy, and this is placing a burden on the printer. It may be helproll paper, but be- ful to change the printing mode, which will change the paper feed timing. cause it could not Choose a higher level of Print Quality in the Advanced Settings of the printer driver. be advanced, it (See "Giving Priority to Particular Graphic Elements and Colors for Printing.") →P.64 could not be de- tected. 1056 Roll feed unit error. Cause The Roll Feed Unit is not working. Corrective Action Turn off the printer, remove the Roll Feed Unit momentarily, and then reinstall it. (See "Removing the Roll Feed Unit.") →P.805 (See "Installing the Roll Feed Unit.") →P.806 If the message is displayed again despite these measures, contact your Canon dealer for assistance. Roll printing is selected, but manual paper is loaded. iPF6300S