Canon imagePROGRAF iPF6300S iPF6300S User Manual ver.1.00 - Page 933

Control Panel > Printer Menu > Paper Details Setting Item (The type of paper is displayed here.) (*1 →P.916 ) CutDustReduct. Description, Instructions If you choose On, a line will be printed at the cut position when paper cutting is selected. This option reduces the amount of debris given off after cutting. It also helps prevent adhesive from sticking to the cutter and keeps the cutter sharp if you use adhesive paper. (See "Reducing Dust from Cutting Rolls.") →P.804 VacuumStrngth Specify the level of suction that holds paper against the Platen. (See "Adjusting the Vacuum Strength (VacuumStrngth).") →P.842 Scan Wait Time Select Entire area to apply the ink drying time after each scan until the document is fully printed. If you select Leading edge, the drying time is entered per each scan until about 110-140 mm (4.3-5.5 in) from the leading edge of the paper, and colors may be uneven in the boundary between the areas with and without a drying time. (The applicable length varies depending on the Print Quality setting.) Roll DryingTime Specify the time to wait for the ink to dry for each sheet. NearEnd RollMrgn Specify the minimum margin at the leading edge of roll paper to ensure better printing quality at the leading edge. Note that if you choose 3mm, it may lower the printing quality at the leading edge and affect feeding accuracy. The printed surface may be scratched, and ink may adhere to the leading edge. It may also cause the Platen to become soiled. NearEnd Sht Specify a margin at the leading edge of sheets to ensure better Mrgn printing quality at the leading edge. 9 Note that if you choose 3mm, it may lower the printing quali- ty at the leading edge and affect feeding accuracy. The prin- ted surface may be scratched, and ink may adhere to the lead- ing edge. Bordless Margin Adjust the margin during borderless printing. Choose Automatic to have the printer automatically detect the paper width and configure the margin settings for borderless printing. If margins are mistakenly created when Automatic is selected, choose Fixed. In this case, the paper width is not detected automatically, and the document is printed without borders, using the margin settings required by the printer. Manual Feed Select the Paper Feed Slot to use when printing on sheets. Normally, select Top. When printing on heavyweight paper such as POP Board, select Front. Return De- Choose OK to restore Paper Details to the default values. 915 faults Paper Details Print the paper settings as specified in Paper Details. Keep Paper Type Select On when printing on a particular type of paper regularly. (See "Changing the Type of Paper.") →P.787 iPF6300S Menu Settings