Canon imagePROGRAF iPF6300S iPF6300S User Manual ver.1.00 - Page 1045
Paper rubs against the printhead, Paper Detailed Settings
View all Canon imagePROGRAF iPF6300S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1045 highlights
Cause Printing may be faint if Print Quality in Advanced Settings in the printer driver is set to Standard or Fast. You are printing on paper that tends to generate dust when cut. Troubleshooting > Problems with the printing quality > Corrective Action In Advanced Settings of the printer driver, choose Highest quality or High in Print Quality. Printing in Fast or Standard mode is faster and consumes less ink than in Highest quality or High modes, but the printing quality is lower. (See "Giving Priority to Particular Graphic Elements and Colors for Printing.") →P.64 In the Control Panel menu, set CutDustReduct. in Paper Details to On. (See "Reducing Dust from Cutting Rolls.") →P.804 Paper rubs against the printhead Cause The type of paper specified in the printer driver does not match the type loaded in the printer. Paper has been loaded incorrectly, causing it to wrinkle. The Printhead is set too low in the Control Panel menu. You are printing on heavyweight paper or paper that curls or wrinkles easily after absorbing ink. Corrective Action Load paper of the same type as you have specified in the printer driver. (See "Loading Rolls in the Printer.") →P.784 (See "Loading Sheets in the Feed Slot.") →P.809 Make sure the same type of paper is specified in the printer driver as you have loaded in the printer. 1. Press the Stop button and stop printing. 2. Change the type of paper in the printer driver and try printing again. Reload the paper. (See "Loading Rolls in the Printer.") →P.784 (See "Loading Sheets in the Feed Slot.") →P.809 In the Control Panel menu, set Head Height to Automatic. (See "Troubleshooting Paper Abrasion and Blurry Images (Head Height).") →P.831 When printing on Heavyweight Coated Paper or other paper-based media, choose a VacuumStrngth setting of Strong or Strongest in the Control Panel menu. If rubbing still occurs, in the Control Panel menu, use a higher Head Height setting. (See "Adjusting the Vacuum Strength (VacuumStrngth).") →P.842 (See "Troubleshooting Paper Abrasion and Blurry Images (Head Height).") →P.831 When printing on CAD Tracing Paper or other film-based media, choose a VacuumStrngth setting of Standard, Strong, or Strongest in the Control Panel menu. If rubbing still occurs, in the Control Panel menu, use a higher Head Height setting. (See "Adjusting the Vacuum Strength (VacuumStrngth).") →P.842 (See "Troubleshooting Paper Abrasion and Blurry Images (Head Height).") →P.831 When printing on paper 0.1 mm (0.004 in) thick or less, choose a VacuumStrngth setting of Weakest in the Control Panel menu. If rubbing still occurs, in the Control Panel menu, use a higher Head Height setting. (See "Adjusting the Vacuum Strength (VacuumStrngth).") →P.842 (See "Troubleshooting Paper Abrasion and Blurry Images (Head Height).") →P.831 If edges of the paper curl and become soiled when printing on rolls of glossy photo paper, in Paper Detailed Settings in the printer driver, set Near End Margin to 20mm. iPF6300S Paper rubs against the printhead 12 1027