Canon imagePROGRAF iPF6300S iPF6300S User Manual ver.1.00 - Page 816

Handling Paper > Handling rolls > Manual →P.800 Paper Cutting →P.801 Cutting Method Use scissors to cut each document from the roll after printing. For continuous printing (if you will cut each page later), select Auto Cut > Yes or select Print Cut Guideline. Choose this option if you want to cut pages by pressing Cutter Unit buttons for manual cutting after printing when Auto Cut > No is selected or Print Cut Guideline is selected in the printer driver. Otherwise choose this option if you want to cut the roll edge after loading a roll. Printer Setting Media Menu > Paper Details > (Various Types of Paper) > Cutting Mode Manual Cut but- Yes ton pressed Driver Setting Auto Cut (See "Cutting Roll Paper After Printing.") →P.196 No Yes Print Cut Guideline No Print Cut Guideline Note • Automatic and Eject are valid only when you have selected Auto Cut > Yes in the printer driver. • With Eject, printing does not resume after a series of jobs have been printed continuously until the roll is cut. 6 • Eject is the preset selection in Cutting Mode for some types of paper. For this paper, we recommend keeping the preset cutting mode. • If documents printed using Automatic, Eject, or manual cutting are short, rolls are advanced a specific amount before cutting to prevent problems with cutting and paper ejection. This may create a wider bottom margin, in some cases. Cut rolls manually in the following cases: Eject (when the paper surface is being scratched / to wait for ink to dry) 798 Important • When cutting wide printed documents after ejection, have two people support the documents. If the paper drops, printed documents may be damaged. • Do not lift the paper when holding printed documents before cutting. If the paper rises, it may affect the printing quality or cause rough cut edges. Specifying the Cutting Method for Rolls iPF6300S