Canon imagePROGRAF iPF6300S iPF6300S User Manual ver.1.00 - Page 1077

Error Message > Messages regarding paper > Cannot feed paper. Cause Paper could not be advanced correctly during feeding. Paper could not be advanced correctly during ejection. Corrective Action 1. Press the OK button. 2. Remove the paper. (See "Clearing Jammed Roll Paper.") →P.1014 (See "Clearing a Jammed Sheet, Fed Manually.") →P.1018 3. Load the paper. (See "Loading Rolls in the Printer.") →P.784 (See "Loading Sheets in the Feed Slot.") →P.809 4. If "Not finished printing. Finish printing remaining jobs?" is shown on the Display Screen, press the OK button. Printing will resume, starting from the page on which the error occurred. 1. Press the OK button. 2. Remove the paper. (See "Clearing Jammed Roll Paper.") →P.1014 (See "Clearing a Jammed Sheet, Fed Manually.") →P.1018 Cannot cut paper. Cause There are sheets left on the Ejection Guide. Corrective Action 1. Press the OK button and remove the paper. 2. Load paper. 3. If "Not finished printing. Finish printing remaining jobs?" is shown on the Display Screen, press the OK button. Printing will resume, starting from the page on which the error occurred. There is a foreign object by the Output Tray, obstructing the Cutter Unit. You are not using the printer under the recommended environmental conditions for the paper. You are using paper that is not compatible with automatic cutting. In other cases, the Cutter Unit may be damaged. (See "Loading Rolls in the Printer.") →P.784 1. Lift the Top Cover and remove the foreign object. 2. If "Not finished printing. Finish printing remaining jobs?" is shown on the Display Screen, press the OK button. Printing will resume, starting from the page on which the error occurred. Use the printer only where the recommended environmental conditions for the paper are met. Note that various environmental conditions are recommended for various types of paper. For details on the recommended environmental conditions, see the Paper Reference Guide. (See Paper Reference Guide .) 1. Specify Manual as the cutting method and use scissors or a cutting tool to cut the roll. (See "Specifying the Cutting Method for Rolls.") →P.797 For information about paper that is compatible with automatic cutting, see the Paper Reference Guide. (See Paper Reference Guide .) 2. Press the OK button and remove the paper. Contact your Canon dealer for assistance. 13 1059 iPF6300S Cannot feed paper.