Canon imagePROGRAF iPF650 iPF650 655 750 755 Basic Guide Step1 - Page 13

Attaching the Roll Holder to Rolls 2 Insert the respective attachments for the roll paper core on the Roll Holder and Holder Stopper. • Using rolls with a 2-inch paper core Holder Stopper (Left Side) Roll Holder (Right Side) Align the tips (a) of the 2-Inch Paper Core Attachment with the holes (b) of the Holder Stopper and insert it firmly. No attachment is needed. b a • Using rolls with a 3-inch paper core Holder Stopper (Left Side) Align the tips (a) of the 3-Inch Paper Core Attachment L with the holes (b) of the Holder Stopper and insert it firmly. b a Roll Holder (Right Side) Align the tips (a) of the 3-Inch Paper Core Attachment R with the holes (b) of the Holder Stopper and insert it firmly. b 3 With the edge of the roll paper facing forward as shown, insert the Roll Holder from the right of the roll. Insert it firmly until the roll touches the flange (a) of the Roll Holder, leaving no gap. a a 4 Insert the Holder Stopper from the left in the Roll Holder as shown. Holding it at the position shown (b), push it firmly in until the flange (a) of the Holder Stopper touches the roll. Lock the Holder Stopper lever (c) by pushing it down toward the shaft side. c a b 13