Canon imagePROGRAF iPF650 iPF650 655 750 755 Basic Guide Step1 - Page 33

6 Holding the new Printhead by the grips (a), remove it from the pouch. Replacing the Printhead a a • When handling the Printhead, always hold it by the grips (a). Never touch the nozzles (b) or metal contacts (c). This may damage the Printhead and affect printing quality. • Never touch the ink supply section (d). This may cause printing problems. a d c b • If you need to put a Printhead somewhere temporarily before installation, do not keep the nozzles and metal contacts facing down. If the nozzles or metal contacts are damaged, it may affect the printing quality. 7 While firmly holding the Printhead you have removed, use your other hand to remove the orange Protective Part (a). Squeeze the grips (c) of Protective Part (b) and pull it down to remove it. bc a • The inside surface of the Protective Parts (a) and (b) is coated with ink to protect the nozzles. Be careful not to touch these surfaces when removing the caps. • The Printhead contains ink to protect the nozzles. We recommend removing Protective Part (b) as you hold it over the Printhead package or safely out of the way to avoid spilling ink and staining your clothes or the surrounding area. If ink accidentally spills, wipe off the ink with a dry cloth. • Do not reattach the Protective Part or protective material. Dispose of these materials in accordance with local regulations. 33