Canton SUB 10.2 Owners Manual - Page 24

ENG Connection Please ensure that all electrical components are switched off before connecting your subwoofer. Depending on the make and model of your amplifier or receiver, there are various connection options for your Canton subwoofer. Connection options for sub­ woofer modules S, M and L: 1. Amplifier or AV receiver with "Pre-Out" or special stereo subwoofer outlet (LFE): connect via Low Level Input (ill. 1 ) Cable: standard cinch cable 2. Amplifier or AV receiver with mono subwoofer outlet socket: connect via Mono Low Level Input (ill. 2 ) Cable: standard cinch cable Connection options for sub­ woofer modules S, M and L: 3. Amplifier or AV receiver ­without special subwoofer outlet: connect with loudspeaker outlets on amplifier via High Level Input (ill. 3 ) Cable: standard speaker cable Ensure correct polarity: red = plus, black = minus Note: The Low Level and High Level Inputs may not be used at the same time! Connection options for subwoofer modules M and L: Connection option for sub­ woofer module L: 4 a. Canton subwoofer with ­additional "High Level Output". Input jacks e. g. for connecting a second subwoofer. (ill. 4 a) Cable: standard speaker cable 5. "Low Level Out Filtered": to reduce the load on smaller active loudspeakers frequencies below 80 Hz are filtered out. (ill. 5 ) 4 b. Canton subwoofer with ­additional "Low Level Output". Input jacks e. g. for connecting a second subwoofer. (ill. 4 b) Cable: standard cinch cable Note: Do not confuse the left and right sides! 24