Casio EX-Z1050PKST Owners Manual - Page 181

To have the camera do this: Select this setting: Remember the numbers used for files. Files will be named using the next sequential number, even if files are deleted or if a blank memory card is loaded. • If a memory card is loaded that already has files stored on it and the largest sequential number in the existing file names is greater than the largest sequential number remembered by the camera, numbering of new files will start from the largest sequential number in the existing file names plus 1. Continue Restart the serial number from 0001 whenever all files are deleted or when the memory card is replaced with a blank one. • If a memory card is loaded that already has files stored on it, numbering of new files will start from the largest sequential number in the existing file names number plus 1. Reset Changing the Camera Date and Time Setting When changing the date and time setting, be sure to do so for your Home City (the location where you normally use the camera). If you already have your Home City setting configured correctly, you can use the procedure under "Setting the Date and Time for Your Home City" (page 182) to change the current time setting only, if you want. IMPORTANT! • Changing the time and date setting without correctly configuring your Home City setting first will cause all of the World Time (page 184) dates and times to be off. ■ Selecting Your Home City 1. Press [MENU]. 2. On the "Set Up" tab, select "World Time" and then press [X]. This displays the current World Time settings. B 181 OTHER SETTINGS