Cisco CP-7911G-CH1 Administration Guide - Page 133

Configuring Call Handling How to Configure Cisco Unified SCCP SRST Note The default phone load on Cisco Unified Communications Manager, Release 4.0(1) for the Cisco 7905 and Cisco 7912 IP phones does not enable the PickUp soft key during fallback. To enable the PickUp soft key on Cisco 7905 and Cisco 7912 IP phones, upgrade your default phone load to  Cisco Unified CM, Version 4.0(1) Sr2. Alternatively, you can upgrade the phone load to cmterm-7905g-sccp.3-3-8.exe or cmterm-7912g-sccp.3-3-8.exe, respectively. SUMMARY STEPS DETAILED STEPS 1. call-manager-fallback 2. no huntstop 3. alias tag number-pattern to alternate-number 4. pickup telephone-number 5. end Step 1 Command or Action call-manager-fallback Purpose Enters call-manager-fallback configuration mode. Step 2 Example: Router(config)# call-manager-fallback no huntstop Disables huntstop. Step 3 Example: Router(config-cm-fallback)# no huntstop alias tag number-pattern to alternate-number Example: Router(config-cm-fallback)# alias 1 8005550100 to 5001 Creates a set rules for rerouting calls to sets of phones that are unavailable during Cisco Unified CM fallback. • tag: Identifier for alias rule range. The range is from 1 to 50. • number-pattern: Pattern to match the incoming telephone number. This pattern may include wildcards. • to: Connects the tag number pattern to the alternate number. • alternate-number: Alternate telephone number to route incoming calls to match the number pattern. The alternate number has to be a specific extension that belongs to an IP phone that is actively registered on the Cisco Unified SRST router. The alternate telephone number can be used in multiple alias commands. OL-13143-04 Cisco Unified SCCP and SIP SRST System Administrator Guide 133