Cisco CP-7911G-CH1 Administration Guide - Page 204

How to Configure Secure Unified SRST Figure 3 SRST Reference Configuration Window Configuring Secure SRST for SCCP and SIP Step 4 To add the new SRST reference, click Insert. The message "Status: Insert completed" displays. Step 5 To add more SRST references, repeat Steps 2 to 4. Configuring SRST Fallback on Cisco Unified Communications Manager The following procedure describes how to configure SRST fallback on Cisco Unified Communications Manager by assigning the device pool to SRST. For complete information about adding a device pool to Cisco Unified Communications Manager, see the "Device Pool Configuration" section in Cisco Unified Communications Manager Administration Guide for the Cisco Unified Communications Manager version that you are running. All Cisco Unified CM administration guides are at the following URL: http://www.cisco.com/en/US/products/sw/voicesw/ps556/prod_maintenance_guides_list.html Step 1 Step 2 Step 3 In the menu bar in Cisco Unified Communications Manager, choose CCMAdmin > System > Device Pool. Use one of the following methods to add a device pool: • If a device pool already exists with settings that are similar to the one that you want to add, choose the existing device pool to display its settings, click Copy, and modify the settings as needed. Continue with Step 4. • To add a device pool without copying an existing one, continue with Step 3. In the upper, right corner of the window, click the Add New Device Pool link. The Device Pool Configuration window displays (see Figure 4). 204 Cisco Unified SCCP and SIP SRST System Administrator Guide OL-13143-04