Cisco CP-7911G-CH1 Administration Guide - Page 137

Configuring Call Handling How to Configure Cisco Unified SCCP SRST Command or Action Step 5 end Purpose Returns to privileged EXEC mode. Example: Router(config)# end Examples The following example shows the transfer-digit-collect method set to the legacy value of orig-call: ! call-manager-fallback transfer-digit collect orig-call ! Configuring Global Prefixes The dialplan-pattern command creates a dial-plan pattern that specifies a global prefix for the expansion of abbreviated extension numbers into fully qualified E.164 numbers. The extension-pattern keyword allows additional manipulation of abbreviated extension-number prefix digits. When this keyword and its argument are used, the leading digits of an extension pattern are stripped and replaced by the corresponding leading digits of the dial-plan pattern. This command can be used to avoid Direct Inward Dialing (DID) numbers like 408 555-0101 resulting in 4-digit extensions such as 0101. Global prefixes are set with the dialplan-pattern command. Up to five dial-plan patterns can be created. The no-reg keyword provides dialing flexibility and prevents the E.164 numbers in the dial peer from registering to the gatekeeper. You have the option not to register numbers to the gatekeeper so that those numbers can be used for other telephony services. SUMMARY STEPS 1. call-manager-fallback 2. dialplan-pattern tag pattern extension-length length [extension-pattern extension-pattern] [no-reg] 3. exit OL-13143-04 Cisco Unified SCCP and SIP SRST System Administrator Guide 137