Cisco CP-7911G-CH1 Administration Guide - Page 241

Integrating Voice Mail with Cisco Unified SRST How to Integrate Voice Mail with Cisco Unified SCCP and SIP SRST SUMMARY STEPS 1. call-manager-fallback 2. voicemail phone-number 3. call-forward busy directory-number 4. call-forward noan directory-number timeout seconds 5. exit 6. voice register pool tag 7. call-forward b2bua busy directory-number 8. call-forward b2bua noan directory-number timeout seconds 9. exit DETAILED STEPS Step 1 Command or Action call-manager-fallback Purpose Enters call-manager-fallback configuration mode. Step 2 Example: Router(config)# call-manager-fallback voicemail phone-number Example: Router(config-cm-fallback)# voicemail 5550100 Step 3 call-forward busy directory-number Example: Router(config-cm-fallback)# call-forward busy 2000 Step 4 call-forward noan directory-number timeout seconds Example: Router(config-cm-fallback)# call-forward noan 2000 timeout 10 Configures the telephone number that is dialed when the message button on a Cisco Unified SCCP IP Phone is pressed. • phone-number: Phone number configured as a speed-dial number for retrieving messages. Configures call forwarding to another number when the Cisco SCCP IP phone is busy. • directory-number: Selected directory number representing a fully qualified E.164 number. This number can contain "." wildcard characters that correspond to the right-justified digits in the directory number extension. Configures call forwarding to another number when no answer is received from the Cisco SCCP IP phone. • directory-number: Selected directory number representing a fully qualified E.164 number. This number can contain "." wildcard characters that correspond to the right-justified digits in the directory number extension. • timeout seconds: Sets the waiting time, in seconds, before the call is forwarded to another phone. The seconds range is from 3 to 60000. OL-13143-04 Cisco Unified SCCP and SIP SRST System Administrator Guide 241