Cisco CP-7911G-CH1 Administration Guide - Page 140

How to Configure Cisco Unified SCCP SRST Configuring Call Handling DETAILED STEPS Step 1 Command or Action call-manager-fallback Purpose Enters call-manager-fallback configuration mode. Step 2 Step 3 Example: Router(config)# call-manager-fallback translate {called | calling} translation-rule-tag Applies a translation rule to modify the phone number dialed or received by any Cisco Unified IP Phone user while Cisco Unified CM fallback is active. Example: • called: Applies the translation rule to an outbound call Router(config-cm-fallback)# translate called 20 number. • calling: Applies the translation rule to an inbound call number. • translation-rule-tag: The reference number of the translation rule from 1 to 2147483647. exit Exits call-manager-fallback configuration mode. Example: Router(config-cm-fallback)# exit Examples The following example applies translation rule 10 to the calls coming into extension 1111. All inbound calls to 1111 will go to 2222 during Cisco Unified CM fallback. translation-rule 10 rule 1 1111 2222 abbreviated exit call-manager-fallback translate calling 10 The following is a sample configuration of digit translation rule 20, where the priority of the translation rule is 1 (the range is from 1 to 15) and the abbreviated representation of a complete number (1234) is replaced with the number 2345: translation-rule 20 rule 1 1234 2345 abbreviated exit Enabling Translation Profiles Cisco SRST 3.2 and later and Cisco Unified SRST 4.0 and later support translation profiles. Translation profiles are the suggested way to allow you to group translation rules and provide instructions on how to apply the translation rules to the following: • Called numbers • Calling numbers • Redirected called numbers 140 Cisco Unified SCCP and SIP SRST System Administrator Guide OL-13143-04