Cisco CP-7911G-CH1 Administration Guide - Page 160
incoming, outgoing, default
View all Cisco CP-7911G-CH1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 160 highlights
How to Configure Cisco Unified SCCP SRST Configuring Call Handling DETAILED STEPS Step 1 Command or Action call-manager-fallback Purpose Enters call-manager-fallback configuration mode. Step 2 Example: Router(config)# call-manager-fallback cor {incoming | outgoing} cor-list-name [cor-list-number starting-number ending-number | default] Example: Router(config-cm-fallback)# cor outgoing LockforPhoneC 1 5010 - 5020 Step 3 exit Configures a COR on dial peers associated with directory numbers. • incoming: COR list to be used by incoming dial peers. • outgoing: COR list to be used by outgoing dial peers. • cor-list-name: COR list name. • cor-list-number: COR list identifier. The maximum number of COR lists that can be created is 20, comprised of incoming or outgoing dial peers. The first six COR lists are applied to a range of directory numbers. The directory numbers that do not have a COR configuration are assigned to the default COR list. • starting-number - ending-number: Directory number range; for example, 2000-2025. • default: Instructs the router to use an existing default COR list. Exits call-manager-fallback configuration mode. Example: Router(config-cm-fallback)# exit Examples The following example shows how to set a dial-peer COR parameter for outgoing calls to the Cisco Unified IP Phone dial peers and directory numbers created during fallback: call-manager-fallback cor outgoing LockforPhoneC 1 5010 - 5020 The following example shows how to set the dial-peer COR parameter for incoming calls to the Cisco IP phone dial peers and directory numbers in the default COR list: call-manager-fallback cor incoming LockforPhoneC default The following example shows how sub- and super-COR sets are created. First, a custom dial-peer COR is created with names declared under it: dial-peer cor custom name 911 name 1800 name 1900 name local_call 160 Cisco Unified SCCP and SIP SRST System Administrator Guide OL-13143-04