Cisco CP-7911G-CH1 Administration Guide - Page 99

Setting Up Cisco Unified IP Phones using SCCP How to Set Up Cisco Unified IP Phones DETAILED STEPS Command or Action Step 1 enable Step 2 Example: Router> enable configure terminal Purpose Enables privileged EXEC mode. • Enter your password if prompted. Enters global configuration mode. Step 3 Example: Router# configure terminal call-manager-fallback Enters call-manager-fallback configuration mode. Step 4 Step 5 Step 6 Example: Router(config)# call-manager-fallback max-dn max-no-of-directories [dual-line | octo-line] [number octo-line] Sets the maximum number of DNs or virtual voice ports that can be supported by the router and activates dual-line mode, octo-line mode, or both modes. Example: Router(config-cm-fallback)# max-dn 15 dual-line 6 octo-line • max-no-of-directories: Maximum number of directory numbers (dns) or virtual voice ports supported by the router. The maximum number is platform-dependent. The default is 0. • dual-line: (Optional) Allows IP phones in Cisco Unified Communications Manager fallback mode to have a virtual voice port with two channels. • octo-line: (Optional) Allows IP phones in Cisco Unified Communications Manager fallback mode to have a virtual voice port with eight channels. • number (Optional): Sets the number of directory numbers for octo-mode. huntstop channel 1-8 Example: Router(config-cm-fallback)# huntstop channel 4 Enables channel huntstop on an octo-line, which keeps a call from hunting to the next channel of a directory number if the last allowed channel is busy or does not answer. • number: Number of channels available to accept incoming calls. The remaining channels are reserved for outgoing calls and features such as call transfer, call waiting, and conferencing. The range is 1 to 8 and the default is 8. • The command is supported for octo-line directory numbers only. end Returns to privileged EXEC mode. Example: Router(config)# end OL-13143-04 Cisco Unified SCCP and SIP SRST System Administrator Guide 99