Cisco WET200 User Guide - Page 14
Advanced Configuration - linksys by wireless g business ethernet bridge
UPC - 745883578320
View all Cisco WET200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Chapter 6 Advanced Configuration Wireless The Wireless tab contains the following three screens that allow you to configure the Bridge's wireless interfaces: Basic Settings, Wireless Security, and Advanced Settings. Wireless > Basic Settings The Basic Settings screen allows you to set the following information. Network Type Keep the default setting, Infrastructure, if you want your wireless Bridge to connect to another wired network through an Access Point. Select Ad-Hoc if you want to connect to another wired network through a second wireless Bridge which is also in Ad-Hoc mode. Click Apply to apply your changes, or click Cancel to cancel your changes. Wireless Site Survey When you click Site Survey on the Basic Settings screen, the Wireless Site Survey screen appears. This screen shows all the wireless networks detected by the Bridge and their general information. You can use this screen to connect to one of these networks. If wireless security is configured in a network, the wireless security screen will also appear; enter the passphrase information on this screen. Wireless > Basic Settings SSID The SSID is the network name used by all devices in a wireless network. It is case-sensitive, must not exceed 32 characters in length, and can contain any keyboard character except spaces. For added security, you should change the default SSID (linksys) to a unique name. If you are using the WET200 in Infrastructure mode to communicate with a wireless access point, enter the SSID of the access point, or click Site Survey to see a list of available access points. For more information, see the "Wireless Site Survey" section. If you are using the WET200 in Ad-Hoc mode to communicate with other clients on a wireless network, enter the SSID of that wireless network. Mode Select the network mode of your wireless access point. If you are unsure of the mode, keep the default setting, B/G Mixed. Select Disabled to disable wireless access. If you use the Site Survey feature, it will search for available networks based on your mode configuration. Channel Select the correct operating channel for your network from the drop-down menu. This should match the channel setting of the other devices in your wireless network. If you are using Infrastructure mode, this should match your Access Point's channel number. If you are using Ad-Hoc mode, this should match your peer device's channel number. If you use the Site Survey feature to connect to your wireless network, the channel setting is configured automatically. Wireless-G Business Ethernet Bridge Wireless > Basic Settings > Wireless Site Survey For each wireless network detected, the following information is displayed: Channel The channel setting. SSID The network name. To join a wireless network, click the radio button to its left. MAC Address The MAC address of the network's access point. Encryption The encryption type. Authentication The authentication type. Network The type of the network. Signal Strength The wireless signal strength in percent. Click Refresh to obtain the most up-to-date data. Click Close to close this screen. 10