Cisco WET200 User Guide - Page 22
Administration - default password
UPC - 745883578320
View all Cisco WET200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Chapter 6 Advanced Configuration Switch > MAC Table Use this screen to configure the MAC address table for the switch. The MAC table is used to switch frames to the correct ports. Before the MAC table is populated, a frame is broadcast to all ports. Learning mode is enabled, then the MAC table is populated automatically. Administration The Administration tab is used for various administrative tasks, such as to change the login password, configure SNMP, save and restore system configuration, restore the factory default settings, and upgrade the firmware. Administration > Password This screen allows you to change the username and/or password for the Bridge. It is recommended that you change the password from its default setting, admin. Switch > MAC Table Global ATU Setting This is a global MAC address table setting. Select the desired settings, then click Apply Global Setting. •• Address Learning This indicates if the switch should automatically learn the MAC address of packets. Select Enable Learning (default) or Disable Learning. •• Age timer Detects and purges obsolete table entries, such as when a connected device moves from one port to another, by checking the idle timeout value of the entries. The range is from 1 to 300 seconds. You can also disable this feature. The default is 300 seconds. Static MAC Entry Besides dynamically learned entries, the MAC table can also contain static, user-defined entries that you enter here. The MAC Address field shows the destination MAC address. The check boxes specify the output ports (1-5 and Wireless) where a packet is routed if its destination MAC address matches the MAC Address field. You can specify more than one output port. To add an entry, enter the destination MAC address, select the output port(s), and click Add New Entry. The new entry will then appear in the Status Address Table list. Note that static MAC entries are not affected by the Age timer and can only be deleted manually. Static Address Table This lists the static MAC address entries and their port vector settings. To delete an entry, select its check box and click Delete Selected Entry. Address Table Dump A complete dump of the MAC address table, including both learned and static entries. If a topology change occurs, click Refresh to remove the learned entries and force the entries to be relearned. At most 64 entries are displayed per page. If there are more than 64 entries, click Get Next Page to see more entries. Wireless-G Business Ethernet Bridge Administration > Password User Name The current user name is displayed (default admin). To change the user name, enter the new user name. Administrative Password Enter a new password from 4 to 63 characters in length. Re-enter to confirm Enter password again to confirm. Click Apply to apply your changes, or click Cancel to cancel your changes. Administration > Web Access This screen allows you to enable or disable https access to the utility. Administration > Web Access 18