Cisco WVC210 Administration Guide - Page 24
Wired to Wireless, Wireless to Wired, STEP 1 - port
UPC - 745883584703
View all Cisco WVC210 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Connecting the Cisco WVC210 Camera Changing Your Network Mode 4 Wired to Wireless To move the camera from a wired network to a wireless network, follow these instructions: STEP 1 Unplug the power adapter from the camera. STEP 2 Unplug the Ethernet network cable from the camera. STEP 3 Re-connect the power adapter to the Power port on the camera. The camera's Ready LED flashes while the camera is initializing. The camera is ready for use when the Ready and Wireless LEDs are solidly lit. Wireless to Wired To move the camera from a wireless network to a wired network, follow these instructions: STEP 1 Unplug the power adapter from the camera. STEP 2 Connect the Ethernet network cable to your PC, router, or switch. STEP 3 Connect the other end of the cable to the Ethernet port on the camera. STEP 4 Re-connect the power adapter to the Power port on the camera. The camera's Ready LED flashes while the camera is initializing. The camera is ready for use when the Ready and LAN LEDs are solidly lit. NOTE You must perform the initial configuration of the Cisco WVC210 camera from a personal computer connected to the camera using a wired connection to the LAN port. The initial configuration cannot be performed over a wireless connection. WVC210 Wireless-G PTZ Internet Video Camera With 2-Way Audio Administration Guide 18