Cisco WVC210 Administration Guide - Page 61
Pan/Tilt, Disable Pan/Tilt while Motion Detection is enabled. Recommended
UPC - 745883584703
View all Cisco WVC210 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
Configuring the Cisco WVC210 Internet Camera Software Applications > Motion Detection 8 Pan/Tilt When Motion Detection is used in conjunction with pan and tilt, the results may not be as desired. For example, if you set motion detection for a doorway and then pan and tilt to a different location, the motion detection may now be pointed at the sky or the floor. It is recommended to disable pan and tilt when motion detection is enabled; however, three options are available: • Enable Motion Detection in all positions. • Disable Pan/Tilt while Motion Detection is enabled. (Recommended) • Allow Motion Detection only in the set motion detection zone (ignore zones outside of set area). If you move the position of the camera (by panning or tilting) then motion detection is disabled. • Check the box to set the idle time for motion detection position. One minute is the default. • Set Area & Sensitivity-Click to enter the motion detection sub-window. You can set the area or areas of the video image to be examined, and adjust the sensitivity of detection for each area. NOTE Motion detection can be triggered by rapid changes in lighting conditions, as well as by moving objects. For this reason, it should only be used indoors. WVC210 Wireless-G PTZ Internet Video Camera With 2-Way Audio Administration Guide 55