Cisco WVC210 Administration Guide - Page 69
Using Auto Patrol, Sample Configurations for the Cisco WVC210 Internet Camera
UPC - 745883584703
View all Cisco WVC210 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
Sample Configurations for the Cisco WVC210 Internet Camera Using Auto Patrol 9 Using Auto Patrol Once your preset positions are set, you can use the Rotational Sequence window to set a patrol schedule. The camera will go to the first position, then move through the list of preset positions until it is finished. The camera will stop at the last position on the list. To create the patrol sequence, follow these steps: STEP 1 Access the setup options for your Cisco WVC210 Internet camera by clicking Setup. STEP 2 Log in as required. STEP 3 Go to the Pan/Tilt window. STEP 4 Click a preset in the Rotational Sequence Window (1-9). STEP 5 Set a time for the camera to stay in that position (options range from 5 -60 seconds). STEP 6 Click Add. This position is now is the first in your rotational sequence. STEP 7 Continue to add more positions; when you are done, click Save. STEP 8 Return to the Home window. STEP 9 Click the Camera Patrol icon to pan once through your preset locations. WVC210 Wireless-G PTZ Internet Video Camera With 2-Way Audio Administration Guide 63