Cisco WVC210 Administration Guide - Page 60
Applications > Motion Detection, Event - default ip
UPC - 745883584703
View all Cisco WVC210 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
Configuring the Cisco WVC210 Internet Camera Software Applications > Motion Detection 8 Applications > Motion Detection The Applications > Motion Detection window shows options for Event and Pan/Tilt. Event NOTE Complete the Mail or FTP sections prior to enabling alerts. • Enable E-mail Alert-If enabled, e-mail alert with attachments are sent when motion is detected. • Enable FTP Alert-If enabled, FTP alert with attachments are sent when motion is detected. • Enable SMB/CIFS Alert-If enabled, connects to the SMB/CIFS Server when motion is detected. - SMB/CIFS Server-Enter the server hostname or IP address of your NAS device (SMB/CIFS host server). - File Path-Enter the folder name to upload video to your NAS device (SMB/CIFS host server). - Login Name-Enter your login name for the NAS device. - Password-Enter your password for the NAS device. Checking either alert box will display options for the attachment. • Interval-Defaults to two minutes before detecting the next event For no delay, choose 0. • Attachment Type-JPEG Image or Video. • Frame Rate-Defaults to 1 fps. • Pre-Capture Length-Defaults to 0 seconds. It is definable from 0 to 4 seconds. • Post Capture Length-Defaults to 1 second. WVC210 Wireless-G PTZ Internet Video Camera With 2-Way Audio Administration Guide 54