Compaq Presario CQ41-200 Compaq Presario CQ41 Notebook PC - Maintenance and S - Page 56
Optical drive, Remove the Phillips PM2.5×5.0 screw
View all Compaq Presario CQ41-200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
Removal and replacement procedures Optical drive ✎ The optical drive spare part kit includes an optical drive bezel and bracket. Description Blu-ray ROM DVD±R/RW SuperMulti DL Drive with LightScribe DVD±R/RW SuperMulti DL Drive with LightScribe Spare part number 578406-001 482178-001 Before removing the optical drive: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first disconnecting the power cord from the AC outlet and then disconnecting the AC adapter from the computer. 4. Remove the battery (see "Battery" on page 4-7). Remove the optical drive: 1. Position the computer with the right side toward you. 2. Remove the Phillips PM2.5×5.0 screw 1 that secures the optical drive to the computer. 3. Insert a thin tool, such as a paper clip 2, into the release access and press to release the drive. (The optical drive disc tray is partially ejected from the optical drive.) 4. Use the disc tray frame to slide the optical drive 3 out of the computer. Reverse this procedure to reassemble and install an optical drive. 4-20 Maintenance and Service Guide